Organize.com - Single Pole Umbrella - Sunbrella® A - Aluminum
(Organize.com)
Price: $399.99

Enjoy the outdoors and remain cool under a beautiful California Umbrella. Features:• Great for patio, pool area and backyard• Fade-proof, stain-resistant and worry-free Sunbrella® fabric• Single piece pole• Deluxe pulley system• Aluminum pole with 2mm wall thicknessSize: Canopy: 9' x 8 ribsPole: 102 2/5"tall x 1 1/2"diameter This Single Pole Umbrella is just what...

Organize.com - Single Pole Umbrella - Import Olefin - Aluminum
(Organize.com)
Price: $299.99

Enjoy the outdoors and remain cool under a beautiful California Umbrella. Features:• Great for patio, pool area and backyard• Olefin canopy is abrasion, stain sunlight and chemical resistant• Single piece pole• Deluxe pulley system• Aluminum pole with 2mm wall thicknessSize: Canopy: 9' x 8 ribsPole: 102 2/5"tall x 1 1/2"diameter The perfect outdoors accessory, each...

Organize.com - Single Pole Umbrella - Sunbrella® AA - Aluminum
(Organize.com)
Price: $429.99

Enjoy the outdoors and remain cool under a beautiful California Umbrella. Features:• Great for patio, pool area and backyard• Fade-proof, stain-resistant and worry-free Sunbrella® fabric• Single piece pole• Deluxe pulley system• Aluminum pole with 2mm wall thicknessSize: Canopy: 9' x 8 ribsPole: 102 2/5"tall x 1 1/2"diameter This 9' market umbrella has a powder...

1987 Party Barge pontoon. Needs a new snap on canopy roof (aluminum frame). Anybody know where/how to get one?

The canopy looks like most permanent aluminum frame canopies except the roof is snap-on canvas. Can't seem to find on anywhere.


Places like Michaels, A C Moore, Automotive trim shops, boat trim shops or awning canvas shops can be of help.

how do I remove aluminum oxide from the canopy supports on my boat?

Can't get the supports loose to clean them....they are stuck in place.


Dilute phosphoric acid applied with a cheap brush and allowed to soak in over a half hour or so will dissolve a lot of the oxide growth. Rinse very well once loose - to neutralise the acid. Keep out of eyes and off skin - use gloves and goggles.

I want to construct a aluminum car port/porch. The roof I want is aluminum, where can I find it..?

I want to know what they are called and where I could find them, I have looked in Home Depot, Aces, and some metal companies.

Something like this :

http://img.alibaba.com/photo/11491636/Ca rport_Canopy_Cover_Kit.jpg

or similar

http://www.homeimprovementkits.com/homei mprovements/carports/aluminum/mas_cpsing .jpg


but did you "ask" at Home Depot; ours [Tampa] carries the materials.

You can also do a "local Google" for aluminum buildings and/or screen rooms; they also carry the DIY components for the carport

Look in the classified ads under building supplies or portable buildings for the same local info.

How do I remove old (REALLY BAKED ON) vinyl film from a painted aluminum canopy?

What I have done so far, removed two 10" letters, has taken nearly 3 hours. I've used "Desolve-it" remover and a fairly dull (or sharp - whichever way you want to look at it) putty knife. Although it does work it is tiring to say the least. I have only "oopsed" 3 or 4 times and dug through the paint... that I can live with seeing as how I intend to repaint the canopy. Is there any easier way to do this or do I just gut it through?


I don't know. But good luck



http://www.toboc.com/forum3/default.aspx ?g=posts&m=1057

Where can I find a new (or used) canopy for my 1976 Olympic boat?

I bought my boat used and it did not come with the aluminum/canvas canopy.


Check out marine stores such as West Marine and Boat US. I've also seen them for sale at Cabelas.



Home Window Awnings Aluminum Window Canopies Vermont

Vermont - Are you looking for home window awnings? Enhance your home- and make it more energy efficient! Our aluminum window canopies can extend ...

Calif. Man Touts Cooling Shelter for Farmworkers

The Napa Valley businessman experimented with several prototypes before finding what he believes is the answer. He created a towable trailer with an aluminum canopy that provides first aid and relief from heat stress, a vehicle he hopes will improve farmworker safety while helping him turn a profit.

Patterson has trademarked his "Cooling Station," which runs on a generator and features NFL-quality misting fans that can reduce surrounding temperatures by 25 degrees. It seats 12, holds up to 300 gallons of water and features an emergency shower.

"It has huge potential in farming, construction and emergency services," said Patterson, a former fan distributor. "It allows them to sit in the shade and cool off."

Patterson, 56, said he hopes to fill a need as California officials debate the best rules for protecting laborers from heat illness and death. The stations also could be sold in places like Florida and Texas, he said.

In May 2008, a pregnant teenager, Maria Vasquez Jimenez, died from heat stroke as she pruned grapevines for more than nine hours in nearly triple-digit heat. The death prompted California Gov. Arnold Schwarzenegger and other state officials to call for stronger farmworker protections, but the effort since then has been uneven.

Aluminum Canopies - News


Headrick installs new sign above Oak Street Place
However, the aluminum, non-lighted signs still cost “several thousand dollars.” “With our production schedule, it took about four weeks from start to finish

Volunteers work to preserve weathering aircraft
Long-range plans call for the Cougar, the A-4M Skyhawk, the HH-46D Pedro and the RF-4B Phantom to be covered with modern canopies as part of a

Finding a variety of wines off the beaten path
One of the most visually striking wineries is Saltwater Farm Vineyard in Stonington, housed in a 1930s airplane hangar with a vaulting roof, milled aluminum

Avionics displays designers see challenges in integrating commercial ...
In the meantime Walters says avionics integrators want high luminance (brightness); no reflective glare especially for bubble canopies; low power

Resting in the Wave hammock feels like floating
And so began the design process: "From wood we went on to carbon fiber aluminum, and then finally we decided to use stainless steel," said Nyberg.